MORTAPAINT is chemically formulated with high UV resistance as concrete primer for your painting requirements. It is suitable for concrete walls, cement fiber board (ceiling), concrete perimeter fence, basement, etc. It is highly resistant, water repellant, and seals off hairline cracks and efflorescence.
|::: Bubble free, durable, non-powdered when dry||::: No peeling / chipping-off|
|::: Easy to apply using paint brush/roller/sprayer||::: Non-toxic, odorless|
|::: No additives needed, just add clean water||::: Ready to use, Interior / Exterior|
|::: No concrete neutralizer neededRecommended for new and old structure||::: Do-it-yourself, good workability|
|::: Compatible to paints, can be applied on any weather conditions.|
|Type: Cementitious powder || Color: White and Pastel color || Mixing Ratio: 1 part of water to 1 part of mortapaint || Setting Time: 1-2 hours|
|Curing Time: 7 days || Flexibility: Excellent || Flexural Properties: 10cm. curve applied on tin plate|
Surface preparation is important for good adhesion. Substrate must be structurally sound and clean, free from oil, dirt and other contaminats. Clean surface thoroughly with water. Repair the uneven wavy wall using Easy Patch All Purpose Masonry then let dry. Apply Mortapaint concrete paint primer as primer before applying topcoat. For repainting job, existing defective paint should be removed by sanding prior to application of topcoat paint.
Mix ratio of one part of Mortapaint concrete paint primer with one part of clean water in a suitable container. Mix until smooth free of lump slurry is achieved. Allow mixture to stand for 3-5 mins., then re-stir for better bonding. Refrain from adding more water to a mix which has already begun to set. Too much water might weaken the property of the product.
Refrain from adding more water to a mixture which has already begun to set.
Adding more water might weaken the properties of the product.
Use paint roller, paint brush or sprayer in applying. Applying 1st coating unto entire wall evenly, let dry for two (2) hours, then apply 2nd coat if required. Additional coat can be applied to suite
|your needs. Repeat the same procedure for each. coat. For curing of Mortapaint, wash surface with clean water.|
|1kg. of Mortapaint Concrete Paint Primer can cover 8 sq.m. per coat depending on the condition of the substrate.|
|Use clean water to wash tools and hands.|
|Available in 2g kgs. bag and 4.5 kgs. gallon can|