EasyPatch is an advanced technology German formulated masonry putty with excellent bonding properties and high UV resistance recommended for bridging hairline cracks, correction of uneven wavy ceiling board and wall and acts as filler for ceiling board gaps and patching nail holes. EasyPatch is cracks free, no peeling/chipping-off and bubble free.
It is semi-flexible, non-toxic, odorless and durable when dry.
::: No additives required
::: No paint/sanding needed
::: Good for new and old structure
::: Do-it-Yourself
Type: Powder
Color: White
Mixing Ratio: 30 parts water to 100 parts EasyPatch
Setting Time: 20 minutes
Bonding Strenght: Excellent
Flexural Strenght: 10 cm. curve applied on thin plate
Platered wall must be structurally sound and clean, free from oil, dirt, and other contaminants. For best results, wash down with clean water thoroughly before application.
Mix the required quantity of EasyPatch powder with clean water in a suitable container until a tacky smooth free from lump substance is achieved. A ratio
of 0.3 part water to 1 part EasyPatch powder is recommended. For more effective result, allow mixture to stand for 3 to 5 minutes. Stir occasionally during use.
Refrain from adding more water to a mixture which has already begun to set. Adding more water might weaken the properties of the product.
Apply EasyPatch to fill joint gaps using putty knife. Alllow to set, then fill up to level finish. Let dry for 20 mins. Clean the excess putty by scrapping using putty knife. Wash surface with wet sponge then let dry, ready for painting.
Available in 2kgs. polybag (10 bags in a master carton) and 1kg. Tin can.